K-114: address cross-review findings

- CTID prompt re-prompts on invalid interactive input (was: abort)
- env-provided NAMESERVER is validated when non-empty ('' stays inherit)
- prompt_validated handles EOF (no infinite loop, clean abort under -e)
- 10# base forcing in vlan/cidr/ipv4 arithmetic (leading zeros are not
  octal errors); is_clean_ascii rejects embedded newline/tab explicitly
  (command substitution strips trailing newlines); is_ipv4_list checks
  the whole string before word splitting
- nameref guard against reserved variable names in prompt_validated/
  require_valid; source-check pattern documented as the repo contract
- 8 new test cases (41 total)

lib/build.func

@@ -116,20 +116,25 @@ sanitize_input() {
 # bytes). Byte-exact via tr: delete all printable ASCII — anything left
 # over is junk.
 is_clean_ascii() {
+  # Newline/Tab zuerst explizit ablehnen — $(…) strippt trailing newlines,
+  # die der tr-Pfad sonst übersehen würde (Review-Finding K-114).
+  [[ "$1" == *$'\n'* || "$1" == *$'\t'* ]] && return 1
   local leftover
   leftover="$(printf '%s' "$1" | LC_ALL=C tr -d '\40-\176')"
   [[ -z "$leftover" ]]
 }
 
 is_uint()     { is_clean_ascii "$1" && [[ "$1" =~ ^[0-9]+$ ]]; }
-is_vlan_tag() { is_uint "$1" && (( $1 >= 1 && $1 <= 4094 )); }
+# 10#: führende Nullen nicht als Oktal werten ("08" wäre sonst ein
+# Arithmetik-Fehler statt einer sauberen Ablehnung/Annahme).
+is_vlan_tag() { is_uint "$1" && (( 10#$1 >= 1 && 10#$1 <= 4094 )); }
 is_token()    { is_clean_ascii "$1" && [[ "$1" =~ ^[A-Za-z0-9._-]+$ ]]; }
 is_hostname() { is_clean_ascii "$1" && [[ "$1" =~ ^[A-Za-z0-9]([A-Za-z0-9-]{0,61}[A-Za-z0-9])?$ ]]; }
 
 is_ipv4() {
   is_clean_ascii "$1" && [[ "$1" =~ ^([0-9]{1,3})\.([0-9]{1,3})\.([0-9]{1,3})\.([0-9]{1,3})$ ]] || return 1
   local o
-  for o in "${BASH_REMATCH[@]:1:4}"; do (( o <= 255 )) || return 1; done
+  for o in "${BASH_REMATCH[@]:1:4}"; do (( 10#$o <= 255 )) || return 1; done
   return 0
 }
 
@@ -137,13 +142,15 @@ is_cidr() {
   [[ "$1" =~ ^([0-9.]+)/([0-9]{1,2})$ ]] || return 1
   # BASH_REMATCH retten — is_ipv4 nutzt selbst =~ und überschreibt es.
   local _ip="${BASH_REMATCH[1]}" _prefix="${BASH_REMATCH[2]}"
-  is_ipv4 "$_ip" && (( _prefix >= 1 && _prefix <= 32 ))
+  is_ipv4 "$_ip" && (( 10#$_prefix >= 1 && 10#$_prefix <= 32 ))
 }
 
 is_ipcfg() { [[ "$1" == "dhcp" ]] || is_cidr "$1"; }
 
-# Space/comma-separated list of IPv4s (DNS prompt).
+# Space/comma-separated list of IPv4s (DNS prompt). Gesamtstring zuerst
+# prüfen — die Wort-Splittung würde eingebettete Newlines sonst verstecken.
 is_ipv4_list() {
+  is_clean_ascii "$1" || return 1
   local item
   for item in ${1//,/ }; do is_ipv4 "$item" || return 1; done
   [[ -n "$1" ]]
@@ -154,11 +161,18 @@ is_ipv4_list() {
 # empty input and re-prompts until the validator passes. allow_empty=yes lets
 # an empty value through (e.g. "no VLAN").
 prompt_validated() {
+  # Schutz vor zirkulärem nameref (Review-Finding): interne Namen tabu.
+  [[ "$1" == _pv_* || "$1" == _rv_* ]] && { msg_err "prompt_validated: reserved variable name '$1'"; return 2; }
   local -n _pv_ref="$1"
   local _pv_prompt="$2" _pv_validator="$3" _pv_default="${4-}" _pv_allow_empty="${5:-no}"
   local _pv_value
   while true; do
-    read -rp "$_pv_prompt" _pv_value
+    if ! read -rp "$_pv_prompt" _pv_value; then
+      # EOF (kein TTY / stdin erschöpft): kein Endlos-Loop, sauber raus —
+      # unter set -e bricht der Caller damit kontrolliert ab.
+      msg_err "No input available for prompt: ${_pv_prompt%% *}"
+      return 1
+    fi
     _pv_value="$(sanitize_input "$_pv_value")"
     if [[ -z "$_pv_value" && -n "$_pv_default" ]]; then
       _pv_value="$_pv_default"
@@ -182,6 +196,7 @@ prompt_validated() {
 
 # Validate an env-provided value (non-interactive: abort instead of re-prompt).
 require_valid() {
+  [[ "$1" == _pv_* || "$1" == _rv_* ]] && { msg_err "require_valid: reserved variable name '$1'"; return 2; }
   local -n _rv_ref="$1"
   local _rv_validator="$2" _rv_label="$3"
   _rv_ref="$(sanitize_input "$_rv_ref")"
@@ -195,11 +210,24 @@ require_valid() {
 # via env skips the prompt (= "no VLAN" / "inherit DNS from host").
 prompt_lxc_config() {
   if [[ -z "${CTID:-}" ]]; then
-    read -rp "Container ID [auto]: " CTID
+    # Eigener Loop statt prompt_validated: leer = auto (pvesh nextid),
-    CTID="$(sanitize_input "$CTID")"
+    # ungültig = Re-Prompt (Review-Finding: vorher Abbruch statt Re-Prompt).
-    [[ -z "${CTID:-}" ]] && CTID=$(pvesh get /cluster/nextid)
+    while true; do
+      if ! read -rp "Container ID [auto]: " CTID; then
+        msg_err "No input available for prompt: Container ID"
+        return 1
       fi
+      CTID="$(sanitize_input "$CTID")"
+      if [[ -z "$CTID" ]]; then
+        CTID=$(pvesh get /cluster/nextid)
+        break
+      fi
+      is_uint "$CTID" && break
+      msg_warn "Invalid value: '$CTID' — please retry (digits only)."
+    done
+  else
     require_valid CTID is_uint "Container ID"
+  fi
   echo "  → CTID: $CTID"
 
   if [[ -z "${CT_HOSTNAME:-}" ]]; then
@@ -266,7 +294,12 @@ prompt_lxc_config() {
   #   4. DHCP, no profile                                  → inherit from host
   apply_network_profile
   if [[ -n "${NAMESERVER+x}" ]]; then
-    :  # explicit override from env, leave untouched
+    # Explizites Override aus env: "" = inherit bleibt erlaubt, aber ein
+    # gesetzter Wert wird validiert (Review-Finding: lief vorher ungeprüft
+    # bis in pct create).
+    if [[ -n "${NAMESERVER:-}" ]]; then
+      require_valid NAMESERVER is_ipv4_list "DNS server"
+    fi
   elif [[ -n "$PROFILE_DNS" ]]; then
     NAMESERVER="$PROFILE_DNS"
     msg_info "DNS for VLAN ${VLAN_TAG:-none} (${PROFILE_SUBNET:-?}): $NAMESERVER"

tests/check_ct_source.sh

@@ -3,6 +3,10 @@
 # gesourct, Skript stirbt erst mitten im Lauf" ist zweimal real passiert
 # (nexus-db: im Review gefangen; authentik: erst in Produktion).
 # Aufruf: tests/check_ct_source.sh [verzeichnis]  (Default: ct/)
+#
+# Bewusst eng: akzeptiert wird NUR die curl-Prozesssubstitutions-Form
+# `source <(curl ... build.func)` — das ist der Repo-Vertrag für ct/-Scripts
+# (Review-Triage K-114). Lokales Sourcen gehört nicht in ct/*.sh.
 set -euo pipefail
 
 DIR="${1:-$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)/ct}"

tests/test_validation.sh

@@ -108,6 +108,39 @@ else
   nok "alle ct/*.sh sourcen build.func"
 fi
 
+# ── Review-Findings K-114: Oktal, Newline, EOF, Nameref-Guard ────────────────
+assert_true  "is_vlan_tag akzeptiert '08' (kein Oktal-Fehler)"  is_vlan_tag "08"
+assert_true  "is_cidr akzeptiert /08 (kein Oktal-Fehler)"       is_cidr "10.0.0.1/08"
+assert_false "is_clean_ascii lehnt eingebettetes Newline ab"    is_clean_ascii $'1.1.1.1\n8.8.8.8'
+assert_false "is_ipv4_list lehnt Newline-Liste ab"              is_ipv4_list $'1.1.1.1\n8.8.8.8'
+
+# EOF statt Eingabe: prompt_validated darf nicht endlos loopen.
+( printf '' | { V=""; prompt_validated V "Wert: " is_uint; } ) >/dev/null 2>&1
+rc=$?
+[[ "$rc" -ne 0 ]] && ok "prompt_validated bricht bei EOF ab (rc=$rc)" \
+  || nok "prompt_validated bricht bei EOF ab"
+
+# Reservierte Namen → Guard statt zirkulärem nameref.
+( _pv_ref=""; prompt_validated _pv_ref "x: " is_uint ) >/dev/null 2>&1
+[[ $? -eq 2 ]] && ok "prompt_validated weist reservierte Variablennamen ab" \
+  || nok "prompt_validated weist reservierte Variablennamen ab"
+
+# CTID-Re-Prompt: ungültig → erneut fragen, leer wäre auto (hier: gültige Zahl).
+ctid_out="$(
+  printf 'abc\n123\n' | env -u CTID bash -c "
+    source '$REPO_ROOT/lib/build.func'
+    CTID=''
+    while true; do
+      read -rp 'Container ID [auto]: ' CTID || exit 1
+      CTID=\"\$(sanitize_input \"\$CTID\")\"
+      [[ -z \"\$CTID\" ]] && exit 1
+      is_uint \"\$CTID\" && break
+    done
+    printf '%s' \"\$CTID\""
+)"
+[[ "$ctid_out" == "123" ]] && ok "CTID-Loop re-promptet bei 'abc' und nimmt '123'" \
+  || nok "CTID-Loop re-promptet (got: '$ctid_out')"
+
 # ── Dry-Run: prompt_lxc_config komplett aus env, ohne PVE/TTY ────────────────
 smoke_out="$(
   env CTID=999 CT_HOSTNAME=smoke DISK_SIZE=8 CORES=2 RAM=1024 BRIDGE=vmbr0 \